does turning off lights save money in a modern home with LED lighting

Does Turning Off the Lights Actually Save Money? The Truth.

does turning off lights save money in a modern home with LED lighting
Does turning off the lights save money? We break down how LED lighting changed the math and where energy costs really come from in modern homes.

You’ve probably heard it a thousand times:
“Turn off the lights when you leave the room.”

But does turning off lights save money in a modern home with LED lighting, smart devices, and energy-efficient appliances? Or is this just outdated advice that stuck around longer than incandescent bulbs?

Let’s break it down honestly.


The Old Rule: When Lights Did Cost Real Money

Back when homes were lit with incandescent bulbs, lighting was surprisingly expensive.

A typical bulb used 60 watts. Leave a few on all evening and you were literally burning electricity. In that era, turning lights off absolutely made a noticeable difference on your hydro bill.

So yes — your parents were right then.


The Modern Reality: LEDs Changed Everything

Most homes today use LED lighting, which is dramatically more efficient.

To put it in perspective:

  • Old incandescent: 60 watts
  • Modern LED (same brightness): 8–10 watts
  • Energy reduction: 80–85% less power

That means:

  • Leaving one LED light on for 10 hours might cost a penny or two
  • Even several lights left on all day adds only a small amount to your monthly bill

So… does turning off lights save money today?
Yes.
But not nearly as much as most people think.


The Big Energy Users in Your Home

If your goal is to actually reduce your electricity costs, lighting is no longer the main issue. The real drivers of your power bill are:

Heating & Cooling

Furnaces, heat pumps, air conditioners, baseboard heaters — these consume far more electricity than any light ever could.

Major Appliances

Dryers, stoves, dishwashers, older refrigerators, and freezers use significant power every time they run.

Standby Power (“Phantom Load”)

Electronics that are “off” but still plugged in — TVs, gaming consoles, office equipment — continue drawing power in the background.

Turning off one space heater saves more energy than turning off dozens of LED lights.


“But Doesn’t Turning Lights On and Off Waste Power?”

This is one of the most common myths.

  • Incandescent bulbs: No issue.
  • CFL bulbs (older curly ones): Tiny startup surge, but still cheaper to turn them off.
  • LED bulbs: Negligible startup energy and no meaningful impact on lifespan.

Bottom line:
If you’re leaving a room for more than a few minutes, turn the light off.
It always saves more power than leaving it on.


What Does It Actually Save?

Let’s keep it real.

Say you have:

  • 10 LED lights
  • Each uses 10 watts
  • Left on unnecessarily for 5 hours a day

That works out to about 15 kWh per month, which might be around $2–$3 on your bill depending on your rates.

So yes — the savings are real… just not dramatic per bulb.


So… Is It Still Worth Doing?

Absolutely — for three reasons:

  1. It does save money, even if it’s small per light
  2. It reduces heat and wear on fixtures
  3. It reinforces energy-smart habits

But if your power bill feels high, the bigger wins come from:

  • Improving insulation and air sealing
  • Upgrading heating or cooling systems
  • Managing high-draw appliances
  • Eliminating unnecessary standby power

Turning off the lights still makes sense.
And yes — turning off lights does save money.

But in modern homes, lighting is no longer the main problem.

If you want to reduce energy costs meaningfully, you need to look at the bigger electrical picture — not just the switches on your wall.

At TYFAR Electric Inc., we help homeowners and businesses understand where their power is actually going and how to make smart, cost-effective upgrades that last.

Because saving energy isn’t about one habit — it’s about the right system.

According to Natural Resources Canada

Thinking about switching to LED lighting?

If you’re curious whether your home or business would actually benefit from an LED upgrade, we can help you figure it out — no pressure, no guesswork.

Request a quote or lighting assessment

Ontario CO alarms 2026 for homes with hardwired smoke and carbon monoxide alarms

Ontario’s New Smoke & Carbon Monoxide Alarm Rules for 2026 — And Why Old Alarms May Not Protect You

Ontario CO alarms 2026 mark a major update to the Fire Code that affects homeowners, landlords, and rental properties across the province. These new requirements explain where you must install carbon monoxide alarms, how often you must replace them, and what to do if your home uses hardwired (120-volt) alarm systems.

Let’s break down what’s changing—and more importantly, what you should check in your home right now.


Ontario CO Alarm Requirements for 2026: What’s Changing

Under the updated Fire Code, you must follow these rules:

✔ You must install CO alarms adjacent to every sleeping area
✔ You must install CO alarms on every storey of the home

In addition, these rules apply if your home contains:
• A gas, oil, or propane furnace or water heater
• A fireplace or wood-burning appliance
• An attached garage
• Any fuel-burning equipment connected to the building

As a result, these requirements now affect houses, condos, apartments, rental units, and care occupancies across Ontario.


Smoke Alarm Rules (Still in Effect)

Ontario already requires working smoke alarms:
✔ On every level of the home
✔ Outside all sleeping areas

However, compliance goes beyond placement alone. Alarm age matters just as much as location, especially as older units lose sensitivity over time.


Under Ontario CO alarm requirements for 2026, homes with fuel-burning appliances, fireplaces, or attached garages must install carbon monoxide alarms on every floor and near all sleeping areas.


The Big Misconception: “It’s Hardwired, So It’s Fine”

Many homes use 120-volt hardwired alarms with battery backup. These systems work well; however, they do not last forever.

All Alarms Expire

  • Smoke alarms: Replace every 10 years
  • Carbon monoxide alarms: Replace every 5–10 years (check the manufacturer label)

Even if your alarm:
✔ Has power
✔ Still beeps when you press “test”
✔ Connects directly to your electrical system

…it may no longer detect smoke or CO accurately once the sensor reaches the end of its service life.

Most importantly, you must replace hardwired alarms entirely. Changing batteries alone does not restore proper detection.


Who Is Responsible?

  • Homeowners: You must ensure alarms are installed correctly, remain functional, and stay within their service life.
  • Landlords: You must supply, maintain, and replace alarms in rental units.
  • Tenants: You must notify your landlord if alarms fail, chirp, or go missing.

In short, everyone plays a role in keeping homes safe and compliant.


Home Safety Checklist

To stay compliant with Ontario CO alarms 2026, follow this checklist:

✅ First, check the manufacture date on the back of each alarm
✅ Then, replace:
 • Smoke alarms older than 10 years
 • CO alarms older than 5–7 years (or per manufacturer)
✅ Next, install CO alarms on every floor and near bedrooms
✅ Test alarms monthly
✅ Replace batteries annually (unless sealed 10-year models)
✅ Finally, service fuel-burning appliances regularly


Ontario’s 2026 Fire Code updates improve early warning and save lives. That said, even the best regulations won’t protect you if your alarms are outdated.

If your home still uses older hardwired alarms, now is the time to upgrade.
A modern, code-compliant alarm system provides better protection for your family, tenants, and property.

Need help replacing or upgrading your smoke and CO alarms?
Contact us — we’ll make sure your home is safe, compliant, and future-ready.

The law is changing for carbon monoxide alarms | City of Ottawa

{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [ { “@type”: “Question”, “name”: “What are Ontario CO alarms 2026?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Ontario CO alarms 2026 refer to new Fire Code requirements that expand where carbon monoxide alarms must be installed. Homes with fuel-burning appliances, fireplaces, or attached garages must install CO alarms on every floor and near all sleeping areas.” } }, { “@type”: “Question”, “name”: “Do I need to replace hardwired smoke and carbon monoxide alarms?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Yes. Even 120-volt hardwired alarms expire. Smoke alarms must be replaced every 10 years, and carbon monoxide alarms every 5 to 10 years depending on the manufacturer. Replacing batteries alone does not restore expired sensors.” } }, { “@type”: “Question”, “name”: “Where must carbon monoxide alarms be installed in Ontario?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Under Ontario CO alarms 2026, carbon monoxide alarms must be installed adjacent to every sleeping area and on every storey of the home when fuel-burning appliances, fireplaces, or attached garages are present.” } }, { “@type”: “Question”, “name”: “Who is responsible for smoke and CO alarms in rental properties?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Landlords must supply, install, maintain, and replace smoke and carbon monoxide alarms. Tenants must notify the landlord if alarms are missing, malfunctioning, or chirping.” } }, { “@type”: “Question”, “name”: “Can an electrician replace hardwired alarms?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Yes. A licensed electrician can safely remove expired hardwired alarms and install new code-compliant smoke and carbon monoxide alarms.” } } ] }

Happy New Year from TYFAR Electric Inc.

Happy New Year from the team @ TYFAR Electric Inc.

As 2025 comes to a close, we want to extend a heartfelt thank you to everyone who has supported TYFAR Electric Inc. this year. Your trust in our team means everything, and we’re proud to continue powering local homes, businesses, and growth across Ottawa and the surrounding area.

Looking ahead to 2026, we’re excited to bring you even stronger service, new innovations, and the same commitment to quality and safety that defines everything we do.

Here’s to a bright, successful, and energized New Year!
Happy 2026!
— The TYFAR Electric Inc. Team

Merry Christmas from TYFAR Electric Inc.

Merry Christmas from all of us @ TYFAR Electric Inc.

As we wrap up another incredible year, all of us at TYFAR Electric Inc. want to wish you and your family a very Merry Christmas.

Thank you to our customers, partners, and community for your trust and support. Whether we were powering your home, keeping your business running, or helping bring your projects to life, it’s been our honour to serve you throughout 2025.

This season, we hope you find time to relax, recharge, and enjoy the moments that matter most.

From our family to yours — stay safe, stay warm, and may your holidays be bright.
Merry Christmas!
— The TYFAR Electric Inc. Team

The Hidden Costs of Delaying Electrical Upgrades in Commercial Buildings

Every business depends on reliable power, and delaying commercial electrical upgrades Ottawa buildings need can quietly cost far more than many owners realize.

In today’s fast-paced commercial world, reliability and efficiency aren’t luxuries—they’re lifelines. Yet many building owners and property managers put off electrical upgrades until a failure forces their hand.

At TYFAR Electric Inc., we have seen firsthand how delaying necessary improvements can quietly drain profits, reduce safety, and limit business growth.


1. The Cost of Downtime

When an aging electrical system fails, productivity stops. Even a short outage can lead to missed deadlines, spoiled materials, or idle staff.

For Ottawa businesses running on tight schedules, unplanned downtime often costs far more than a proactive upgrade ever would.


2. Energy Inefficiency Adds Up

Outdated lighting, motors, and distribution panels consume more energy than modern, code-compliant systems.

For example, replacing old ballasts, wiring, or panels can drastically lower monthly utility bills. With energy prices rising across Ontario, efficiency upgrades often pay back faster than most realize.


3. Safety and Liability Risks

Old electrical systems pose hidden dangers. Overheating circuits, worn insulation, and outdated breakers can all create fire or shock hazards.

A single electrical incident could lead to equipment loss, insurance claims, or even business interruption. Upgrading to current code helps protect both people and property.


4. Reduced Property Value

Buyers and tenants look for modern, safe, and efficient buildings.

However, a dated electrical infrastructure can lower your building’s market value or turn away prospective tenants—especially those needing reliable power for technology, machinery, or EV charging.


How TYFAR Electric Helps You Stay Ahead

Our commercial team designs and installs upgrades that future-proof your building—whether that means modernizing panels, adding electrical capacity, improving lighting, or preparing for EV infrastructure.

We work around your schedule, minimize disruption, and ensure every project meets or exceeds ESA and Ontario Building Code standards.


Ready to get ahead of the next outage?

Book a commercial electrical assessment today and discover where efficiency, safety, and savings meet.

613-225-8585
[email protected]

Blueprints with a yellow hard hat, pencil, and digital multimeter representing planning electrical upgrades for commercial renovations.

How to Plan Electrical Upgrades for Commercial Renovations

Renovating a commercial space is more than fresh paint and new layouts—it’s an opportunity to modernize the electrical infrastructure. From increasing capacity to ensuring ESA compliance, planning your electrical upgrades early will save time, money, and stress. At TYFAR Electric Inc., we guide Ottawa businesses through safe, efficient, and code-compliant upgrades that keep operations running smoothly.

Continue reading
LED lighting upgrades Ottawa office showing bright recessed panels

Upgrading to LED Lighting: Cost, Savings & Benefits

A practical guide for homeowners and businesses in Ottawa & surrounding area.

Thinking about switching to LEDs? Smart move. LED upgrades cut energy use, reduce maintenance calls, and improve light quality—often with a payback measured in months, not years. Here’s a clear, no nonsense guide to the costs, savings, and benefits so you can decide if now is the right time.

Continue reading
Electrical safety warning about DIY work in Ottawa

The Dangers of DIY Electrical Work and How to Stay Safe

Electrical work might look simple in online tutorials, but what they don’t show you are the real dangers — from severe electric shocks to devastating house fires. At TYFAR Electric Inc., we’ve seen the aftermath of improper electrical installs. The dangers of DIY electrical work in Ottawa are real, and while saving money can be tempting, cutting corners with electricity is never worth the risk.

Continue reading
Licensed electrician upgrading electrical panel in Ottawa home

Top 5 Electrical Upgrades That Boost Property Value

Get More from Your Home by Powering It Smarter

Thinking about renovating or selling your home?

While kitchens and bathrooms often steal the spotlight, savvy homeowners know that electrical upgrades are one of the most valuable investments you can make.

At TYFAR Electric Inc., our licensed Ottawa electricians help homeowners improve safety, energy efficiency, and resale appeal with smart electrical upgrades. Here are the top 5 electrical upgrades that boost property value—and why they matter.

Continue reading